Krystal®
Krystal® is a post-catalyzed conversion varnish finishing system that offers the ultimate in durability. It is a high solids, water white, non-yellowing formula was specifically designed for interior wood surfaces that are exposed to extreme moisture, heat or household chemicals. This self-sealing system has outstanding application and sanding properties. Easy to apply with any equipment. Available in 275 and 550 VOC compliant formulas.
Performance
- Water white and non-yellowing
- Ultra low in formaldehyde
- Excellent adhesion on both closed and open grain substrates
- Excellent mar and scratch resistance
- Fast dry – dries faster than most conversion varnishes for fast “stack and pack”
Additional Information
HAPS Compliant
HAPS-compliant industrial wood coatings are formulated to meet regulatory standards for reducing hazardous air pollutants (HAPs) while maintaining high performance and durability.
Interior
Interior wood finishes are high-quality coatings designed to protect and enhance wood surfaces within indoor environments.
Krystal® Products
Chemical Resistence Evaluation
Purpose: Test the ability of the finish to withstand substances typically found in kitchens and bathrooms. Exceeds AWI specifications for household chemical resistance for SYSTEM 5 conversion varnish and SYSTEM 11 catalyzed polyurethane. Contact and dry time of each chemical is in accordance to AWI and KCMA test procedures.
Results | |
---|---|
Vinegar | Excellent |
Lemon Juice | Excellent |
Orange Juice | Excellent |
Grape Juice | Excellent |
Ketchup | Excellent |
Coffee | Excellent |
Olive Oil | Excellent |
Boiling Water | Excellent |
Cold Water | Excellent |
Nail Polish Remover | Excellent |
Household Ammonia | Excellent |
VM&P Naphtha | Excellent |
Isopropyl Alcohol | Excellent |
Wine | Excellent |
Windex | Excellent |
409 Cleaner | Excellent |
Lysol | Excellent |
33% Sulfuric Acid | Excellent |
77% Sulfuric Acid | Poor |
28% Ammonium Hydroxide | Excellent |
Gasoline | Excellent |
Murphy’s Oil Soap | Excellent |
Vodka 100 Proof | Excellent |
1% Detergent | Excellent |
10% TSP | Excellent |
Ethanol/ Water | Excellent |
Mustard | Excellent |
Acetone | Excellent |
Test and Performance Characteristics
Krystal has undergone rigorous quality testing to verify performance and application characteristics. The M.L. Campbell laboratory has formulated Krystal to meet or exceed the required performance levels established by KCMA for finishes. Krystal has been tested utilizing the following ASTM and KCMA test methods: 5=Excellent, 4=Very Good, 3=Good, 2=Fair, 1=Poor
Results | |
---|---|
Print Resistance | Excellent |
Hot & Cold Check Resistance | Excellent |
Cross Hatch | Excellent |
Blocking | Excellent |
Wet Heat Resistance | Very good |
Edge Soak | Excellent |